I have been building an RC plane recently (I will post it when it’s complete) and when I went to hook up the ailerons I realized I didn’t have Y-connector to plug the servos into one channel. It was too late in the day to go to a hobby shop and I didn’t want to […]
Score! I got this really awesome tool at a yardsale the other day. It’s nothing I’ve ever seen before. It’s a hand crank drill press. It’s a hand crank drill with a lever to lower the drill. This drill press has stamped into it “Made In Germany”. The guy I bought it from said he […]
There have been multiple times where I have needed a 9v battery lead/clip but did not have one. Just the other day I was working on a project that I wanted to hook a 9v up to and like before I did not have any 9v battery clips, so I made my own. I made […]
My RC boat is almost finished! I got the rudder installed and I just finished installing the stuffing tube, shaft, and motor. I now just have to get a battery to use and then I’ll try ‘er out! To mount the stuffing tube to the boat I drilled two holes in the center of the […]
Time to build a rudder for the boat. I made the rudder out of some brass sheet I got at the hardware store. To start I took my brass sheet and I drew on it the dimensions of the rudder. I made the rudder 1-1/4″ wide at the top and 1″ at the bottom. The […]
So I already have a boat prop, but now it’s time to build a boat for it. My plan is to build a very basic boat I can use in my pool. I will use a cheap toy boat from Wal-Mart as the hull, a DC motor that I saved from my destroyed RC helicopter, […]
As I was sitting bored at my desk surfing the web on RC boats, in particular homemade RC boats, I stumbled across a how-to on making your own brass propellers. When I have fooled around with making RC boats in the past, I’ve always had trouble when it came to making props. I once made […]
So I’ve built my Firecracker Dispenser out of wood and with tighter tolerances. This version, version 2, is better constructed than version 1, but I am still having problems with jamming. This version is made out of 1/8″ balsa wood. It’s the exact same design as the first version, it is now just made out […]
It has been by goal for a few years to design and build a machine that will hold multiple firecrackers, dispense them one by one, and then light them. Not only would this be really cool to just set on the ground and let it run, but my end goal with this idea will be […]